Start a Duel

Free tools

Pre-shipment Inspection Checklist

Pick your product type and get a QC checklist in English and Chinese. Send it to the factory before production, and give the same list to your inspector.

Also applies

General consumer goods: 20 checks + AQL plan

Sampling (visual): Inspection standard: ISO 2859-1 / ANSI/ASQ Z1.4, single sampling plan, normal inspection, General Inspection Level II. Lot size: 1,000 pcs. Code letter: J; sample size 80 pcs, drawn at random from all cartons. AQL: Critical 0 (Ac 0 / Re 1, zero tolerance), Major 2.5 (Ac 5 / Re 6), Minor 4.0 (Ac 7 / Re 8). Details

Sampling (on-site tests): On-site tests (dimensions, weight, barcode scan, function and carton checks): Special Inspection Level S-2, sample size 5 pcs, Ac 0 / Re 1 per test. Carton drop test on at least 1 export carton.

1. Documents and preparation / 文件与准备

  • Approved golden sample, final spec sheet and artwork are available on site现场备有确认样(封样)、最终规格书和设计稿
  • Inspection takes place when at least 80% of the order is finished and at least 80% packed大货完成至少 80%、包装完成至少 80% 时进行验货
  • Defect list (critical / major / minor) and AQL levels agreed in writing before inspection缺陷分类(致命 / 严重 / 轻微)和 AQL 已在验货前书面确认

2. Quantity and sampling / 数量与抽样

  • Count finished and packed quantity against the PO; note any shortage清点已完成和已包装数量,对照订单,记录短装
  • Draw samples at random from cartons across the whole lot, not only the top layer从整批货的不同外箱中随机抽样,不能只抽上层
  • Quantity per carton and per inner pack matches the packing list每箱数量、每内包装数量与装箱单一致

3. Packaging and labelling / 包装与标签

  • Retail packaging, colour, print and wording match the approved artwork彩盒 / 零售包装的颜色、印刷和文字与确认稿一致
  • Barcode on product and packaging scans correctly and matches the SKU产品和包装上的条码可扫描,且与 SKU 对应
  • Country of origin marking ("Made in China") present where required按要求标注原产地(Made in China)
  • Inserts, manuals, warranty cards and accessories are complete说明书、保修卡、配件、内附物齐全

4. Appearance and workmanship / 外观与做工

  • Compare colour, finish and material with the golden sample under daylight在日光下对照封样检查颜色、表面处理和材质
  • Check for scratches, dents, stains, burrs, sharp edges, cracks and loose threads检查划痕、凹痕、污渍、毛刺、锐边、裂纹、线头
  • Workmanship consistent across the sample (no mixed batches)抽样产品做工一致,无混批

5. Dimensions and weight / 尺寸与重量

  • Measure key product dimensions and weight against the spec (record actual values)按规格测量产品关键尺寸和重量,记录实测值
  • Measure export carton outer size and gross weight against the packing list测量外箱外尺寸和毛重,对照装箱单

6. Function and on-site tests / 功能与现场测试

  • Function test on every sampled unit (does it do what it is sold to do)抽样产品逐个做功能测试
  • Fit and assembly check: parts fit together, no missing screws or components配合与装配检查:部件能装配,无缺螺丝、缺零件
  • Carton drop test (1 corner, 3 edges, 6 faces from the agreed height); product undamaged外箱跌落测试(1 角 3 棱 6 面,按约定高度),产品无损坏

7. Export cartons and shipping marks / 外箱与唛头

  • Shipping marks on cartons: PO number, item, quantity, carton number, gross / net weight外箱唛头:订单号、品名、数量、箱号、毛重 / 净重
  • Cartons are strong enough (correct ply), sealed properly, no crushed or wet cartons外箱强度(层数)符合要求、封箱牢固,无压扁或受潮

How to use it

  1. Send the checklist to the factory with the PO, and ask them to confirm it in writing.
  2. Keep a golden sample signed by both sides; the inspector compares against it.
  3. Book the inspection when at least 80% of the goods are packed, before you pay the balance.
  4. Use a special level (S-2 or S-3) for measurements and on-site tests: a smaller sample, but any failure counts.

If the lot fails

  • Critical defects: never accept. The factory sorts or reworks, and the lot is re-inspected.
  • Major defects over the limit: ask for 100% sorting or rework at the factory and a re-inspection before shipment; agree in advance that the factory pays the re-inspection fee.
  • Only minor defects slightly over the limit: you can accept with a written concession (discount, replacement units or free spare parts), or ask for rework if the defects affect sales.
  • Put any concession in writing before paying the balance, and keep the inspection report as evidence.
Pre-shipment QC

No one on site to run this checklist? Our inspector uses your list and AQL plan and sends a photo report the same day. From $229 per man-day.

See Pre-shipment QC

Frequently asked questions

What should a pre-shipment inspection checklist include?

Quantity and random sampling, packaging and labels against the artwork, appearance against the golden sample, dimensions and weight, function and on-site tests such as a carton drop test, export carton marks, plus the AQL plan and a defect list split into critical, major and minor.

Why give the checklist to the factory in Chinese too?

The factory QC team and the inspector work in Chinese. A bilingual checklist sent before production removes the most common excuse after a failed inspection: "we did not know you would check that".

Can an inspector confirm safety or chemical compliance on site?

No. On site the inspector checks that the test reports exist and match the product, model and supplier. Safety and chemical tests are done by an accredited lab.

Related: AQL calculator · CBM calculator · Golden sample · Sample vs mass production

Free · 24 hours

Is your supplier a real factory or a trading company?

Send one Alibaba link or company name. We check the business license, ownership and risk records and email you the answer within 24 hours.