AQL Sampling Calculator
Enter your lot size and AQL to see how many pieces to inspect and how many defects you can accept. Based on ISO 2859-1 / ANSI/ASQ Z1.4, single sampling, normal inspection.
Inspect 80 pieces, picked at random from across the lot.
| Defect class | AQL | Sample size | Accept (Ac) | Reject (Re) |
|---|---|---|---|---|
| Critical | Not allowed | 80 | 0 | 1 |
| Major | 2.5 | 80 | 5 | 6 |
| Minor | 4.0 | 80 | 7 | 8 |
The lot passes only if every defect class is at or below its Ac number. If any class reaches its Re number, the lot fails.
Turn this into a full inspection checklist → · Tie the balance payment to this inspection →
How to use the result
- Agree the AQL levels and a defect list with your supplier before production starts, in writing.
- At inspection, pull the sample at random from all cartons, not just the top layer.
- Count major and minor defects separately. One critical defect (safety, legal) fails the lot.
- If the lot fails, the usual options are rework and re-inspection, sorting at the factory, or a discount. Decide before you pay the balance.
Sample size by lot size (General Level II)
| Lot size | Code letter | Sample size | Major 2.5 (Ac/Re) | Minor 4.0 (Ac/Re) |
|---|---|---|---|---|
| 2–8 | A | 2 | 0 / 1 (n=5) | 0 / 1 (n=3) |
| 9–15 | B | 3 | 0 / 1 (n=5) | 0 / 1 |
| 16–25 | C | 5 | 0 / 1 | 0 / 1 (n=3) |
| 26–50 | D | 8 | 0 / 1 (n=5) | 1 / 2 (n=13) |
| 51–90 | E | 13 | 1 / 2 (n=20) | 1 / 2 |
| 91–150 | F | 20 | 1 / 2 | 2 / 3 |
| 151–280 | G | 32 | 2 / 3 | 3 / 4 |
| 281–500 | H | 50 | 3 / 4 | 5 / 6 |
| 501–1,200 | J | 80 | 5 / 6 | 7 / 8 |
| 1,201–3,200 | K | 125 | 7 / 8 | 10 / 11 |
| 3,201–10,000 | L | 200 | 10 / 11 | 14 / 15 |
| 10,001–35,000 | M | 315 | 14 / 15 | 21 / 22 |
| 35,001–150,000 | N | 500 | 21 / 22 | 21 / 22 (n=315) |
| 150,001–500,000 | P | 800 | 21 / 22 (n=500) | 21 / 22 (n=315) |
| 500,001+ | Q | 1,250 | 21 / 22 (n=500) | 21 / 22 (n=315) |
Single sampling, normal inspection. Tightened and reduced inspection use different tables. For contracts, check the standard itself.
We inspect in China against your AQL and defect list, with photos and a same-day report. From $229 per man-day.
See Pre-shipment QCFrequently asked questions
What AQL should I use for consumer products?
A common default is 0 for critical defects, 2.5 for major defects and 4.0 for minor defects, with General Inspection Level II. Stricter buyers use 1.5 for major and 2.5 for minor.
What do Ac and Re mean?
Ac is the maximum number of defective units you accept in the sample. Re is the rejection number: if you find that many or more, the lot fails for that defect class.
Why does the sample size change for some AQL values?
The standard table has arrows: for some combinations the plan moves to the next smaller or larger sample size. This calculator follows the arrows, so a strict AQL on a small lot can require a larger sample or 100% inspection.
Related: Sample vs mass production: why quality changes · Golden sample · Landed cost calculator