Guides / Factory audit
Video Factory Audit vs On-site Visit
Updated 2026-11-16
A video factory audit is a live, guided video call through the factory. It is fast and inexpensive, and good enough to confirm the basics: the factory exists, makes your type of product and has the equipment it claims. An on-site visit sees what the camera is not pointed at: real capacity, how busy the factory is, working conditions and quality control in practice. Use video for screening and small orders, and a visit for large orders, custom tooling or when the video raised doubts.
Side by side
| Video audit | On-site visit | |
|---|---|---|
| Speed | Within days | Needs scheduling and travel |
| Cost | Lower | Higher, especially for remote factories |
| Who controls what you see | The supplier holds the camera | The auditor walks where they choose |
| Confirms the factory exists | Yes, if done live | Yes |
| Confirms your product is made there | Partly | Yes |
| Capacity and workload | Hard to judge | Much better |
| Quality control in practice | Limited | Good |
| Good for | Screening, small orders, follow-ups | First large orders, tooling, doubts |
When is a video audit enough?
- You are screening several suppliers and want to drop the weak ones quickly.
- The order is small relative to the cost of a visit.
- You have already worked with the supplier and want a check on a new product line.
- You need an answer this week.
When do you need an on-site visit?
- A first large order or a large deposit.
- Custom molds or tooling that will sit in the factory.
- The video call raised doubts: avoided areas, a line that did not seem to be running, staff who could not answer production questions.
- You need to judge capacity for a big or seasonal order.
A pattern we see often: on a video call, the factory points the camera at its cleanest sample room or a single showcase line. On an on-site visit, a look into the corners of the workshop or the warehouse regularly shows disorganised raw material storage, damp semi-finished goods or large piles of unprocessed rework.
How to run a good video audit
The supplier holds the camera, so you have to lead. Prepare a shot list and send it in advance, then ask for it live:
- Start at the gate: company sign, address, and the business license on the wall.
- Walk without cutting from the office to the production area. A cut is a reason to ask why.
- The line for your product, running. Ask them to zoom in on the machine, the material and the product coming off it.
- Work in progress and raw material for orders like yours.
- Quality control: where finished goods are checked, any testing equipment, rejected items.
- Warehouse and packing: cartons, labels, storage conditions.
- Questions to people on the line, not only the salesperson.
Keep it live and recorded on your side where the law allows. Pre-recorded videos are useful as marketing, not as an audit.
Signs to watch for on a video call
- "The line is stopped today" for every line you ask about.
- The camera stays close-up and avoids wide shots.
- The factory sign or license does not match the company you are paying.
- Nobody on site can explain the production process.
- The video quality "drops" whenever you ask for a specific area.
One of these can be bad luck; several together are a pattern.
What should you get after a video audit?
At the end of the call, write down the answers while they are fresh, or ask whoever ran the call for notes covering:
- what was shown and what was refused or skipped;
- whether the line for your product was seen running;
- the people spoken to and their roles;
- a short verdict: real factory or not, and any doubts to follow up.
A recording is useful evidence for later, but nobody rewatches an hour of video to make a decision. The short written verdict is what you will actually use.
Combining both
A practical approach for a new supplier:
- Document check of the registered company.
- Video audit to screen it.
- On-site visit for the chosen supplier before the first large deposit.
- Pre-shipment inspection before the balance payment.
See what is a factory audit in China and what a factory audit report should include.
Either way, keep it an open visit
Whether by video or in person, a legitimate audit is an open check as the buyer's representative: no hidden recording, no attempts to obtain confidential information such as formulas or other customers' details.
How we do it
Our Video Factory Audit is a live call led by our staff in English, billed by the hour, with a recording and notes afterwards. For larger orders, a Factory Visit puts our inspector on site, with a photo report within 48 hours.
Frequently asked questions
Can a video audit replace a factory visit?
For small orders and first screening, often yes. For large orders, custom tooling or serious doubts about the supplier, an on-site visit sees much more than a camera the supplier controls.
How long should a video factory audit take?
Usually 30 to 90 minutes, enough to walk from the gate through the workshops, the production line for your product, quality control and the warehouse.
What is the biggest weakness of a video audit?
The supplier controls the camera. You see only what they choose to show, so you have to lead the call and ask for specific shots.
Related guides
Factory Audit vs Quality Inspection: The Difference
A factory audit checks the supplier before you order; a quality inspection checks the goods before you pay the balance. When to use each.
Factory auditWhat a Factory Audit Report Should Include
A useful audit report gives a clear verdict, confirms identity and factory status, covers capacity and QC, lists red flags and has photos.
Factory auditWhat Is a Factory Audit in China and When Do You Need One?
A factory audit checks that a supplier really exists, makes your product and can deliver your volume. When it is worth it and what it covers.